Search

[sextoyjunkie]

1. If your exterior is really dirty, with carpet fuzz, hair, dust bunnies.
It's best to clean the outside of the onahole with hand soap, people say use cool
or warm water but i had my first maria ozawa since 2008 and i been washing it
with hot water (maynot be such a thing to do now since all the latest onaholes
have dual layer structure inside! yeah the pink stuff  )

2. Now since you've done that it's probably best fill a sink of with warm to medium hot water.
and soap your hand that you will use to clean the inside with make sure you create a perfect lather
to build up so you can clean the inside with you're hand.

3. Let the water out of the sink (You can do this depending how deep your sinks are in your housing)
Take the onahole where the interior entrance is and just rinse it out a couple of times with cold water
(this will kill all the soap suds easily) Then let it drain out it doesn't have to be completely drained out
[via; upside down]

4. Now this is where it gets a little controversial and what i mean is there is alot of talk about not turning your
onahole inside out and cleaning them, I myself had no problems i was scared at first but i slowly turned it inside out.
This is so much better because if there is spots you missed inside of the onahole you can see the mistakes "you've missed" Like the other day with my Proof of Meiki 006
I do prefer more lube in the toy, but what i am saying this way by turning it inside out you can easily see what you've
missed cleaning because it is very hard to see what you are doing inside unless you have secret KGB intelligence where you setup mini spy cameras in the toy   [inside joke there!] But once you get that cleaned up with liquid soap i myself use dial liquid soap for my toys doesn't matter what fragrance you use i  myself has had no problems what so ever.

5. Keep your onahole inside out i would recommend the softest cloth you have, try not to use any towels with ridges on them, buy you can use a paper towel (you may run through a lot) just to get that inside cleaned while its turned inside out, once you dried the inside to your satisfaction, please i repeat, please becareful turning it back to its normal state again don't get to rough with stretching it trying to get it to turn back inside out. If so it should flop back to its original state.

6. Since you've turned your onahole back to its original state, it will be come sticky to fix that problem before you start this procedure make sure you get a towel to work under just like in my photos of all my toys, just so you don't want to have extra that extra powder mess to clean up and don't want to end up slipping down neither! Make sure you get corn starched based baby powder, never get Talc (or Talcum samething) I have heard it cause cervical cancer in females its very sad this has happened to a close friend of mine i knew, so i want to make sure everyone get safe and guys too don't want you to form any type of prostate cancer or urethral type cancers! Also if you're not sure always read the back of the babypower, if it has any "talc" on the back of the ingredients do not buy it Put it down, if that's all the store sells don't buy it, go to another store its not worth to risk anything that may hurt you!

7. Storage, now you are wondering what to store the onaholes in? Well if you have smaller onahole meiki's such as the Maria Ozawa Proof 001 and the Maria Ozawa successor Any toys that size or a little bigger should fit in a standard freezer bag, and if you want you can store two onaholes in there don't worry about them sticking together as long as they are dried 100% and powdered and stored in a cool area you shouldn't have anything to worry about!


*Take caution when cleaning dual layer meiki's such as the 006 and other meiki's you don't want to turn those inside out, due to the fact it will tear up the inside construction later on in life if you keep doing so, only use these steps for onaholes such as the Maria Ozawa Proof of Meiki 001 and others that have similar construction.*

[yourself]

Very nicely done!

I would like to add to the turning your meikis inside out.  It is obvious that you can do this, however, whenever you do this it is just putting it at risk.  THERE IS NO NEED TO TURN IT INSIDE OUT.  For a quick rinse clean take it to the shower, use warm water and let if sit under the faucet, drain it once every 10 seconds and repeat 4 times.  This method has kept my toys in good shape for a long time. 

Personally the only thing I see with mine is they become slightly sticky over time, I haven't used corn starch with them yet.  But once the lube is on them there is really no need.

[sextoyjunkie]

Very nicely done!

I would like to add to the turning your meikis inside out.  It is obvious that you can do this, however, whenever you do this it is just putting it at risk.  THERE IS NO NEED TO TURN IT INSIDE OUT.  For a quick rinse clean take it to the shower, use warm water and let if sit under the faucet, drain it once every 10 seconds and repeat 4 times.  This method has kept my toys in good shape for a long time. 

Personally the only thing I see with mine is they become slightly sticky over time, I haven't used corn starch with them yet.  But once the lube is on them there is really no need.

Thanks alot bro just though i share with you guys, using cornstarch baby power works fine to keep your toys from being sticky just don't use talc!!

[thecandy]

would usage of lots of soap washing on the inside cause small air bubble like holes on the inner layer's surface? My ZXY has these air-bubble like holes on the surface of the inner layer, not sure why, anyone else have this?

[yourself]

would usage of lots of soap washing on the inside cause small air bubble like holes on the inner layer's surface? My ZXY has these air-bubble like holes on the surface of the inner layer, not sure why, anyone else have this?

I don't have those, at least I have never noticed them.  Soap will not make bubbles, but it will definitely cause some harm to your meiki toy.  Soap contains sodium lauryl sulfate (google it) which is very bad for materials other than metals.  I use to use it on my toys but I am glad I stopped, when I did use it my toys became a little bit sticky.  So I just use hot water now and it works great.

[Noobmember]

Thanks!

[sextoyjunkie]

No prob guys If i have any more suggestions i would be more than happy
to re-format my thread.

 

[Leeoku]

What does the corn starch do to the toy? Can you also just use corn starch?