Welcome to the
ToyDemon Forum
.
Back to store
Home
Help
Search
?
ToyDemon Forum
?
ToyDemon Lounge
?
General Suggestions
Portable Nozzles / Bottles for Cleaning the Inside of Onahole
« previous
next »
Print
Pages: [
1
]
Go Down
Author
Topic: Portable Nozzles / Bottles for Cleaning the Inside of Onahole (Read 2771 times)
BigDog
Baby Demon
Posts: 16
Props: 5
Portable Nozzles / Bottles for Cleaning the Inside of Onahole
«
on:
October 21, 2014, 06:41:19 PM »
Can or would TD offer a product or two for cleaning insides of long / internally textured onaholes ?
I have seen the question asked several times regarding "how to" or "best method" especially for those products were turning
them inside out is not easy, or recommended.
I am hoping that TD can offer items of this nature so we can have the one stop shopping for all of our onahole needs.
Here are a few that I have found, and sure they can be ordered outside of TD, but again, having one place to purchase all of
the products needed and related to onaholes, their use, care, cleaning as well as the discrete shipping already provided would be a an excellent addition to the products already offered.
Thank you for your consideration -
Plus+Size Living Brylanehome Personal Hygiene Refresher -
http://www.amazon.com/Plus-Size-Living-Brylanehome-Refresher/dp/B00EGMOCSY/ref=sr_1_222?ie=UTF8&qid=1413935729&sr=8-222&keywords=bottle+nozzle
Portable wash buttocks soft BB-317 (japan import) -
http://www.amazon.com/Portable-wash-buttocks-BB-317-japan/dp/B007ZLB3NA/ref=sr_1_13?ie=UTF8&qid=1413936213&sr=8-13&keywords=personal+hygiene+nozzle
Boulder Bidet - Portable Travel Hiking Backpacking Bidet -
http://www.amazon.com/Boulder-Bidet-Portable-Travel-Backpacking/dp/B005ONIO1A/ref=pd_sim_sbs_hpc_7?ie=UTF8&refRID=1DX1Y41TJSGX5EV08XH0
Brondell GS-70 GoSpa Travel Bidet -
http://www.amazon.com/Brondell-GS-70-GoSpa-Travel-Bidet/dp/B008CSDKSQ/ref=cm_cd_ql_qh_dp_t
Logged
SonicBoom
Sr. Demon
Posts: 303
Props: 77
Re: Portable Nozzles / Bottles for Cleaning the Inside of Onahole
«
Reply #1 on:
October 22, 2014, 12:22:26 AM »
I don't want to seem like I'm pooping on anyone's ideas, I like that someone is thinking outside the box to try and come up with a different solution, I just don't think this one would work.
I'm not sure these products would do a better or faster job than just running tap water into the tunnel and cleaning it out with your fingers. Besides, all of these products were designed to spray water on the outside of a persons genitals, I think it would lack the water pressure to do a good job of flushing out the inside.
I think the bigger issue with meiki maintenance is drying. If someone could come up with a better way of drying the interior of the tunnel, without leaving moisture or damaging the meiki, you would definitely be on to something.
SB
«
Last Edit: October 22, 2014, 12:24:36 AM by SonicBoom
»
Logged
quake3guy
Baby Demon
Posts: 12
Props: 2
Re: Portable Nozzles / Bottles for Cleaning the Inside of Onahole
«
Reply #2 on:
June 24, 2015, 02:00:00 AM »
Here is something that seems to work well for any closed-hole device; an idea I had while reading the product description for the "Furi Furi Ona Shaker" at J-List.. Wine Bottle! They also use a mild detergent, which appears to be analogous to unscented laundry detergent for sensitive skin.
First step, fill an empty/cleaned wine bottle about 1/3 full with filtered water and add a half teaspoon of detergent. Then with the toy's cavity slightly wet, gently insert the open end of the wine bottle til it will go no further, perhaps squishing a little to go further.
Now tilt the two items so the wine bottle is horizontal and shake them in unison from side to side, splashing water deep into the cavity then back into the bottle for a minute or two, progressively retracting the bottle so it exposes more of the cavity wall to this sloshing action. When the bottle is nearly out of the cavity, turn the two items so the bottle is upside-down above the toy, squeeze the toy to work loose any remaining debris, which may visibly float into the bottle against gravity. Turn the two items so the bottle is now upright and the sudsy water falls out of the toy as you remove the bottle. Repeat as necessary.
Next, rinse the bottle so there's no detergent left behind, fill it 3/4 with fresh filtered water and repeat the above horizontal sloshing action while progressively retracting the bottle from a fully-inserted position. This will rinse out the detergent, and you're now ready for drying.
~5 minutes and you're done, No mess!
Does anyone have suggestions for drying though? I wish there were some kind of glass funnel with rounded edges that would widen the tunnel to allow a cloth to be inserted without rubbing anything, then left in place a short while after the funnel is retracted.. Ideas?
«
Last Edit: June 24, 2015, 02:33:41 AM by quake3guy
»
Logged
Print
Pages: [
1
]
Go Up
« previous
next »