Search

[Zeke]

COMPLETELY UPDATED THIS POST BROS!

Hello TD bros, i would have posted this wayyyy sooner, but i did not have a really good camera to record with... until now! i picked up a Sony Alpha NEX-3 and the rest was history! Anyway, Onaholes not feeling as good as it was when you 1st got it and you don't use it much anymore? Well you might start to use it again after this mod. I bought the Mini Meiki Chinatsu, Kotone and Mini Meiki Long: Miku. and they felt good, but i thought they could use an extra kick! So i started to try to mod the textures and the end result was a an Onahole that i can't put down! The video will explain everything you need to know so, start watching! WARNING!! YOU CAN BURN YOURSELF, PUNCTURE OR DESTROY YOU'RE ONAHOLE/S IF YOUR NOT CAREFUL!! I AM NOT RESPONSIBLE IF YOU HURT YOURSELF OR DAMAGE YOUR ONAHOLE/S Do this at your own risk. (Unfortunately, the video is down sampled to 480p due to my basic videobam account. It was originally 720p, though that should not stop anyone from watching.)



So with said and done, how hard is this to you may ask. To be fully honest, it's fairly easy to do. You just flip it inside out, carve flip it again and test!

1. butter knife and or fork (These will NOT be used for eating again as, that would be gross! Keep them for future mods!)
2. open flame (stove works best)
3. onaholes up for modding
4. about 10 to 15 minuets of time

Well thats it! Enjoy! You have any questions ask them here or message me!

Edit: Also, trying to find new metallic objects that can be used for modding besides forks and butter knifes. In addtion to that, trying to mod a larger masterbators like the Extreme Impact mini hip. So far i can tell you, it's a bitch to do ... but i have partially done it and it did feel better! So hips CAN be modded... but it's a bitch to do and pays off! More on these later!

[HardGay]

NICE!!! thanks for showing the video.. looks awesome .going to have to try it sometimes.

[demondabbler]

Thanks for sharing! It goes without saying, but do NOT try this with an electric stove!!!!!!!

[Zeke]

Thanks for sharing! It goes without saying, but do NOT try this with an electric stove!!!!!!!

yeeaahh lol! you could light a candle and use the flame to heat the knife.

[DaaaBears]

Man awesome video. Map props to you! It's pretty awesome what you did in the video, I was worried that you would burn your hand towards the end of the video! I'd love to try this. Thanks for sharing, look forward to your future mods/ideas!

[HardGay]

wait..why can't you use a electric stove??

[Zeke]

wait..why can't you use a electric stove??

you need an open flame to heat your tools

[HardGay]

i was thinking I can just hold the knife on the electriv stove till it heats up..but i suppose then i'll burn myself... hah..love your avatar btw..a thing of beauty

[lust2cum]

Very clever mod and I like the idea of breathing new life into a worn-out masturbation sleeve!!

[boldav49]

I've done this same procedure using a normal soldering iron with pretty decent results. I took a couple of cheap Doc Johnson toys and flipped them inside out. Then I carefully carved away with a soldering iron trying to create a particular pattern.  One thing to be careful about is that you can have it split right through to the other side if you aren' careful since the material is under quite a lot of tension while reversed. I also found out that you can ADD material to the inside where you want it.  I even included a G-Spot to one of my unaholes that I didn't like that much before. However, I can't say that I made a $12 toy turn into a $70 Meiki, but it was a whole lot better than the simple ribbed design that many of these less expensive toys sport. Below are pictures of the "Milf" mods I did to an inexpensive D-hole.  I obviously widen up the opening considerably, and then I added a G-spot and a Maria Ozama stinger at the end.  It definitely improved the toy, but the harder elastomer still isn't my favorite. 

[Zeke]

I've done this same procedure using a normal soldering iron with pretty decent results. I took a couple of cheap Doc Johnson toys and flipped them inside out. Then I carefully carved away with a soldering iron trying to create a particular pattern.  One thing to be careful about is that you can have it split right through to the other side if you aren' careful since the material is under quite a lot of tension while reversed. I also found out that you can ADD material to the inside where you want it.  I even included a G-Spot to one of my unaholes that I didn't like that much before. However, I can't say that I made a $12 toy turn into a $70 Meiki, but it was a whole lot better than the simple ribbed design that many of these less expensive toys sport. Below are pictures of the "Milf" mods I did to an inexpensive D-hole.  I obviously widen up the opening considerably, and then I added a G-spot and a Maria Ozama stinger at the end.  It definitely improved the toy, but the harder elastomer still isn't my favorite.

Nice job bro! once you get the hang of it, it's a lot more easy to do. I always thought about adding more to one to see if i could make it even better but never got around to it. Good to see someone else try it and find that it works.