Search

[new11]

Is there a trick to using a Fleshlight with the Meiki Plush Doll?

The description says it should work with a Fleshlight, the banner/front page product picture shows is with a Fleshlight with the case all the way in, and the video also mentions that you should be able to insert it do the case doesn't show, but doesn't show how.

The hole is so tight that the big part doesn't want to go in so I'm worried about forcing it. Even if I did force it in, I have no idea how the ridges at the end of the case would fit in the hole like in the product picture. The hole seems too small to fit a fleshlight like in the picture. Any tips?

[crux]

The plush has a lot more space inside than you think. One poster even made the joke of the doll being a fisting teaching aide. Widen the entrance as it may just be pulled tighter by the straps and push your hand in to open up that inside mesh as it may just be turned over and twisted on itself. Kind of like straightening out the lining of the bag. Don't be afraid, it is made well.

One of the biggest issues was getting onaholes like the zxy in. The easiest way is to just put a bag over it so it could slide in easier.

[new11]

It's not the depth. It's definitely the diameter of the opening and not the strings causing the problem. The case makes it frictionless to insert, it's just that the big part won't fit through the hole.

[rahrahrah]

Is there a trick to using a Fleshlight with the Meiki Plush Doll?

The description says it should work with a Fleshlight, the banner/front page product picture shows is with a Fleshlight with the case all the way in, and the video also mentions that you should be able to insert it do the case doesn't show, but doesn't show how.

The hole is so tight that the big part doesn't want to go in so I'm worried about forcing it. Even if I did force it in, I have no idea how the ridges at the end of the case would fit in the hole like in the product picture. The hole seems too small to fit a fleshlight like in the picture. Any tips?

Yeah, you can do fit it all the way in. Put it in to where the ridges hit the entrance. Then with your thumbs on the case and use both hands to spread her nubby legs apart and then push in with your thumbs until the case is in there as much as you want. A little bit of force and pull her over the case will be needed. Once the ridges part goes in it becomes a big pain to get it out so I don't recommend putting your fleshlight case in all the way it if you want to swap stuff.

[new11]

Partial success. Was able to get the big part in that way, but it stopped at the ridges even though I was spreading the legs and pushing with my thumbs as hard as I could. Seeing how the biggest ridge is almost 1cm larger than the area beneath the ridges, I don't see a way the hole can stretch any more to accept it.

[crux]

Could be the case itself. I believe that some of the fleshlight cases are smaller. Might be an option to shop for a smaller fleshlight case by itself. I think they run up 10 or 15 usd at most, but could be wrong.

[new11]

Nope. I have 2 and neither fits. Some of the themed ones have smaller cases, but the standard one which is in the product picture won't fit. Bummer. Maybe the hole on my Meiki was sewn a little too small.

[Universal]

Could be the case itself. I believe that some of the fleshlight cases are smaller. Might be an option to shop for a smaller fleshlight case by itself. I think they run up 10 or 15 usd at most, but could be wrong.

Crux rocking the knowledge yet again.

Dead on. New signature cases do fit (rthey are slimline next to the original) They dont insert fully, there will be some overhang out of the pouch. Not a flush fit in the least.

The important thing is to be sure youve properly inserted the FL into its case, situating the overrim material over the top ridge. It buffers enough that its not uncomfortable but you will realize there is hard plastic underneath there. Thats why I mostly gave it up. Some say its like her pubic bone but not any woman's Ive encountered. (there's hard spots but not like that)

[new11]

After reading up on it it sounds like the original big case is gray. I'm pretty sure I have the new case. It looks the same as the zombie case in the video. It's really strange that they show pictures with the (black) case flush and mention you can put it in flush in the videos if it can't do that...

Unless I'm mistaken but I'm 99% sure that's a Flesh Light.

Here's the picture I'm talking about


And my case looks like this

[Universal]

After reading up on it it sounds like the original big case is gray. I'm pretty sure I have the new case. It looks the same as the zombie case in the video. It's really strange that they show pictures with the (black) case flush and mention you can put it in flush in the videos if it can't do that...

Unless I'm mistaken but I'm 99% sure that's a Flesh Light.

Here's the picture I'm talking about

And my case looks like this

Most of the cases made iin the last 2 years are the slender style. The most prevalent is the pearlized one that comes with the signature girls. I have a few of those and Id say the linked one you've shown is *most likely* the "new" style.

The older grey cases, which I also have were behemoths and truly a farking nightmare in all respects. If somebody got one in their MPlush, it was by brute force.

Your picture (imo) shows a classic FL, case undeterminable. From my own first hand experience, I have to assume its the new style slim case and NOT an old gray or the STUnit gold case.

I won't refute anyone saying they have gotten their current FL case to sit flush within the Plush's pouch. However, for me it was simply a level of comfort with the forces involved. I could likely have given it more of a shove but there was too much risk for too little reward imo. And knowing the forces I was going to apply to it during use, I said to myself, why risk busting up the seam, especially for so little gain.

Ive not really explored it much further as the FL experience in the MPlush, to me, is sub par to any Ona experience Ive had in combo. On rare occasion where I want to blast from the past for my mast, I just use it handed or in a pillow sandwhiching config. For whatever reason, to my mind, the FLs just dont "scale up" in the Plush like most of my Onas do. My guess is that really only the Lotus node varieties have a feature your really need to work in for, the rest tend to be repetitions of ribs, bumps, teeth, etc.

[rahrahrah]

Yeah I think they are right. I only have the pearl/gold fleshlight cases which taper off slightly. The old grey ones are straight so they are thicker at the bigger end.

[Universal]

Yeah I think they are right. I only have the pearl/gold fleshlight cases which taper off slightly. The old grey ones are straight so they are thicker at the bigger end.

Be careful. When I was last around, gold = STU case and it was NOT equal in size to the pearl. Smaller then the gray stupidity but it was still larger.

There was a whole big conspiracy because they *said* the gold and the new pearl/colored cases would fit the shower unit. Guess what  wasn't true? 

Try it, if it feels ok, go for it. If not, retreat. Not worth ruing the plush.

[HardGay]

There's a video in the additional Information tab on the MPD page that showed a fleshlight being inserted into the MPD, From the looks of it it'll be a tight fit to get the plastic casing in..but it's possible... I dont have a fleshlight so I can't contribute much to this..but I think the MPD cavity size is pretty good for majority of the toys to fit and tight down w/ the pull strings. IMO if the insert cavity is too big then other toys will feel loose and wobbly around the back even though it's tied at the entrance.

Video link. https://www.youtube.com/watch?v=1gk_7CKnnWg

[hermes]

Why not use a FL *without* the case?

Or, use the FL Flight series

[HardGay]

Fleshlights are through holes so the ends arnt closed, without the casing.....when your done your gonna have a big mess in the doll's insert fabric.