Search

[winkle]

I'm bit new to toy sites but noticed none of the specs here seem to include the length and widths for the canals openings which I find pretty annoying because I don't if they'll be less or more than what I'm looking for . I can find out some info from other sites but there's a lot of models here that I can find any sizes on at all , is there any reason for this lack of info ,as I thought it would of been the most important detail when trying to figure out a good fit - yet see nothing ..

How do others here check to make sure they have the right size when buying ??

I had my eyes on few things on sale , but its big risk ( esp as i live in Europe ) and cant just return anything.

thanks,

winkle

[Universal]

I'm bit new to toy sites but noticed none of the specs here seem to include the length and widths for the canals openings which I find pretty annoying because I don't if they'll be less or more than what I'm looking for . I can find out some info from other sites but there's a lot of models here that I can find any sizes on at all , is there any reason for this lack of info ,as I thought it would of been the most important detail when trying to figure out a good fit - yet see nothing ..

How do others here check to make sure they have the right size when buying ??

I had my eyes on few things on sale , but its big risk ( esp as i live in Europe ) and cant just return anything.

thanks,

winkle

First off, welcome. 

I'm not so sure what you are reading as canal depths actually is that. My assumption is they're physical dimensions of the toy from which one can roughly gather if the canal would be of a short or longer variety.  They can be tricky as some have thicker walls and such but mostly the longer the toy, the deeper the canal, mostly.

Another thing I think you might consider is you aren't buying shoes. There is a certain give to the material and its not always a requirement that you be able to get to the back or smuggle your entire package into the toy. If you are large, look to the larger, usually more expensive toys (material cost $ afterall) If not, know most of this stuff is built for asian men so you should be able to  get into them plenty deep and get the most out of them (and again, theyll be some "give")

Yeah, its sort of a trust exercise that it'll work out but that's just how it is sometimes. If you have unusual dimensions then let us know but if you are roughly average, most toys will work (TD wouldn't stock a bunch of stuff average guys cant make good use of, theyd go broke!) 

[Universal]

I had my eyes on few things on sale , but its big risk ( esp as i live in Europe ) and cant just return anything.

If it makes you feel better, once you break the seal, you bought it, just like all of us. Can't really size it to yourself then put it back if it didn't fit. Unhygienic and against TDs policies.

[winkle]

I'm bit new to toy sites but noticed none of the specs here seem to include the length and widths for the canals openings which I find pretty annoying because I don't if they'll be less or more than what I'm looking for . I can find out some info from other sites but there's a lot of models here that I can find any sizes on at all , is there any reason for this lack of info ,as I thought it would of been the most important detail when trying to figure out a good fit - yet see nothing ..

How do others here check to make sure they have the right size when buying ??

I had my eyes on few things on sale , but its big risk ( esp as i live in Europe ) and cant just return anything.

thanks,

winkle

First off, welcome. 

I'm not so sure what you are reading as canal depths actually is that. My assumption is they're physical dimensions of the toy from which one can roughly gather if the canal would be of a short or longer variety.  They can be tricky as some have thicker walls and such but mostly the longer the toy, the deeper the canal, mostly.

Another thing I think you might consider is you aren't buying shoes. There is a certain give to the material and its not always a requirement that you be able to get to the back or smuggle your entire package into the toy. If you are large, look to the larger, usually more expensive toys (material cost $ afterall) If not, know most of this stuff is built for asian men so you should be able to  get into them plenty deep and get the most out of them (and again, theyll be some "give")

Yeah, its sort of a trust exercise that it'll work out but that's just how it is sometimes. If you have unusual dimensions then let us know but if you are roughly average, most toys will work (TD wouldn't stock a bunch of stuff average guys cant make good use of, theyd go broke!)

I have a bit of disability which affects my erections and ability to get stimulated but Im at least 6.5  not fully erect ( or as erect as i can currently get ) and can hit the Gspot ( so i assume the back ) of the Yu namiki hip model I have ( which I read was 6.5 " on another site ) , my only complaint is after that it seemed to go loose quick after a week of daily use - esp G spot .

I was thinking THEN something tighter then with different textures , or a hip with an anal hole would be the way to go - basially maximum stimulation with minimum effort.

If you go here and scroll down you will see what I mean by canal depths and widths , in fact every toy on that site has them so thats why I puzzled to see you didn't.

You see for Yu Namiki it gives Canal diameter: 0.5 and Internal Length: 6.5 inches

winkle

[Universal]

Ok. Gotcha. Well as helpful in making a decision as it may seem, I wonder the utility of the information.  A toy can be 6 inches deep but the big feature is 2 inches in... or 2 inches from the back.

I am of a similar stature as yourself and have not once really considered or even wondered about depth other than I know I prefer larger toys as there is more room for me to work. Any problems I had came more from poor design of the stimulation features than how deep the toy was.

I certainly won't suggest I know better than you your condition but I wonder if you really have such a limited "depth" window for stimulation. What I would suggest is something that is uniform throughout, say dots, ribs, whathave you. They tend to start in the front with those and go all the way to the back. The toy is more about getting feeling throughout than variations within the zones of the toy.

[winkle]

Ok. Gotcha. Well as helpful in making a decision as it may seem, I wonder the utility of the information.  A toy can be 6 inches deep but the big feature is 2 inches in... or 2 inches from the back.

I am of a similar stature as yourself and have not once really considered or even wondered about depth other than I know I prefer larger toys as there is more room for me to work. Any problems I had came more from poor design of the stimulation features than how deep the toy was.

I certainly won't suggest I know better than you your condition but I wonder if you really have such a limited "depth" window for stimulation. What I would suggest is something that is uniform throughout, say dots, ribs, whathave you. They tend to start in the front with those and go all the way to the back. The toy is more about getting feeling throughout than variations within the zones of the toy.

I heard the model I have ( same as the Angel you sell ) is considered quite loose or, " jiggly " ( which is fine ) though I did do a bit of tweaking to loosen  up the hole because I couldnt fit in , or get hard enough to push all the way through , I'm just wondering now in hindsight if that was a bad idea or whether its pretty common for folk to do  ?

Also is there anything similar to  Maria Ozawa in the hip line ? ( its easier for me to hold use ) again given my physical issues.

winkle

[Universal]

Its bad people are mistaking me for an employee. (Im not, nor affiliated in any way. Just a hopefully helpful chap) 

The only Maria like hip would be the Extreme Pleasure and I've not gotten one yet. They're both NPG so materially they should be similarly. Not sure about the features internally. Think the EHip isn't as detailed IIRC>

[crux]

Meikis will always be a safe bet for size, just be wary on the newer generations as sometimes it takes a while for the factory to remove all the problems and quality issues. Just keep in mind, much harder to clean and can usually be a tad floppy and hard to hold without a mount or the plush doll.

Tengas practically never have quality problems and unlike other companies they try to be honest to the point of humility in telling you how long they think the product would last effectively with regular use. Just that it most likely survives two or three times the length of time. For your size, the flipholes may be a decent choice and they are said to be some of the craziest in regards to textures and sensitivity.

Some of the Toys Hearts are well known for their durability, especially more recent iterations. If you are worried of internal tearing of the product, this might also be a valid option for you. Also, like the Tenga, very little effort is needed for cleaning, unlike the meikis.

What I would suggest for size is to check the pictures and look for when the guy is holding it in his hand. As a normal male hand it is likely very little difference in comparison to any other guy, unless they are Yao Ming or some other 6ft 8in+ person. I usually looked at that and the opened up view of the onahole to compare how much is there between end of canal and end of toy. It may seem irritating but you can mostly eyeball it and get a good estimation, that and the actual toy size is mentioned on the details tab. Keep in mind that you can technically add a good half inch to most toys to allow some stretch and give without it completely bottoming out or become a through-hole.

[winkle]

One thing thats issue is my shoulders / hands etc when using sleeves / hips I mean up to point its ok but when you have to start increasing speed to get more out of it its a problem ( esp when it gets looser ) ideally it would be great if there was a hands free solution like a sleeve / automatic pump combo that went slow ( im not good with motor
 vibrations ) , but the closest I can find is Autoblow blast .

Have any of you tried that , or the A10 rends ?

winkle