Search

[anderson1137]

Hi everyone, this is my first post here.
I just got my ZXY yesterday and i gotta say it is far better than tenga products. I've read some posts about how to dry the ZXY such as flip it inside out (i dont want to do that), using a whisk, and also using alcohol (i dont know how that works I tried using rubbing alcohol and it didnt help). I managed to get most of the inside dry but i cant seem to get the end of the ZXY dry. the nothing can open up the whole canal to open up the end of the tunnel. HELP!!!!

[billyjoe]

Drape a 6" x 6" (doesn't have to be exact!) piece of microfiber towel over the end of a small 2" max. diameter wire whisk and gently push the whisk to the end of your Meiki.  This will stretch the end of the canal and will absorb almost all of the residual moisture, and to get that last 1% of moisture let the whisk stay in there for an hour or so.  Use a small fan in front of the opening if the relative humidity is high.  The only drawback is that after several dozen drying sessions using this technique, the canal will stretch a bit.  Not much, but you will notice your ZXY is not quite as tight as before.  Hope this helps!

Oh, almost forgot!  When you remove the whisk, the piece of towel will be stuck inside.  No problem, just place clean fingers in to pull it out.  If you don't want to do this with your fingers for whatever reason, use a much larger piece of towel (12" x 16" or so) over the whisk to dry your toy, letting an inch or two remain sticking out of the opening.  Be aware, however, that doing this tends to stretch the canal more than using a small piece of towel just at the end of the whisk.